Kearneys Spring is mainstream suburban Toowoomba — 1970s through 1990s brick-and-tile with standard-sized driveways and garages. Slabs are generally sound, so most jobs are a straight resurface. Black soil movement and frost still set the joint and sealer specification.
What we do here
Kearneys Spring is the most conventional suburban work we do in Toowoomba. Housing is largely 1970s to 1990s brick-and-tile on regular blocks, driveways are a standard size, and the slabs are generally sound.
That makes most jobs here a straightforward resurface: strip whatever coating is failing, prepare the concrete properly, lay and seal. The complications are regional rather than site-specific — black soil below and frost above.
- Standard driveways and crossovers
- Garage floors in vinyl flake or epoxy
- Paths, side access and steps
- Patios and small entertaining areas
- Removing chalked spray-on coatings
- Joint replacement for soil movement
What the slabs are like in Kearneys Spring
Most of the labour on a Kearneys Spring job is removal. Original spray-on finishes from the 1980s and 90s chalk, fade and lose adhesion patchily, and laying new material over them means the new surface is only as attached as the failure underneath. Everything comes back to sound concrete first.
Black soil still governs the joints. Reactive Darling Downs clay moves slabs seasonally, so control joints have to be carried through the new surface rather than covered. A covered joint on this soil does not just telegraph — it opens.
Garage floors are a common request here, and the choice between epoxy and vinyl flake matters more in a climate with wide temperature swings. Flake systems tolerate movement and hide dust and tyre marks better than a plain epoxy film, which is why we specify them more often in Toowoomba than on the coast.
Licensed concreting contractor, fully insured.
On site, with the slab tested before anyone quotes a finish.
Foot traffic at 24 hours, vehicles at 72 on most finishes.
Brisbane, Ipswich, Logan, Redlands and both coasts.
How we schedule Kearneys Spring work
Toowoomba is a planned run, so quotes and jobs are grouped into trips with a firm date ahead rather than a rolling estimate. No travel premium on the rate.
We avoid laying overlays and sealers into frost, so winter dates are set around the weather. A coating that freezes before curing fails.
Services in this area
What goes down most often here
Stencilled concrete
A paper stencil laid into the colour coat, sprayed over and lifted — leaving pattern joints in a second colour.
See finishFlake flooring
Vinyl flake broadcast into resin and sealed. The garage and laundry floor that hides dust and shrugs off tyre marks.
See finishColoured concrete
Full-strength oxide colour, with or without a cut pattern. Reads terracotta against brick and charcoal against render.
See finishThe questions we get asked in Kearneys Spring
Can you lay over the existing spray-on finish?
No. It has failed in patches, so anything over it is only as attached as the failure. Removal is most of the labour and all of the difference.
Epoxy or flake for the garage floor?
Flake, more often than not, in this climate. It tolerates movement and hides dust and tyre marks better than a plain epoxy film.
Why do the joints have to show in the new surface?
Because on black soil the slab moves. A covered joint on this soil does not just show through — it opens up.
How long before we can park on it?
Foot traffic at 24 hours, vehicles at 72 on most finishes. Exposed aggregate and stamped work can need up to seven days.
Worth reading first
Send a photo of the slab.
We will tell you whether it can be resurfaced, what finish suits it, and what it costs — before anyone turns up with a grinder.