Beenleigh has the oldest housing stock in this part of Logan alongside light industrial and commercial hardstand. Slabs run from pre-1970 residential to worn commercial concrete, so more jobs here start as repair rather than resurfacing. Low-lying river flat sections need drainage checked before any finish is quoted.
What we do here
Beenleigh is a mixed job list. There is older residential — genuinely old, some of it pre-1970 — and there is light industrial and commercial hardstand around the town centre. The two need different things.
On the residential side, more jobs start with repair than with finish selection. On the commercial side the question is usually wear and traffic rather than appearance, and the right answer is often a plain, hard, well-sealed surface rather than a decorative one.
- Older residential driveways and paths
- Commercial and light industrial hardstand
- Concrete repairs, cutting and removal
- Crack stitching and joint replacement
- Plain and sealed high-wear surfaces
- Drainage assessment on low-lying sites
What the slabs are like in Beenleigh
Age is the first condition. Concrete from the 1960s and earlier was poured to different standards, sometimes without adequate reinforcement, and on a proportion of Beenleigh jobs the honest answer is replacement rather than resurfacing. We say so at the quote. A resurfacing business that never recommends replacement is not assessing anything.
The second is water. Parts of Beenleigh sit on the Logan River flats, low and flat, with slow drainage and a real flood history. On those sites we look at where water goes before we look at what colour you want, because a decorative surface over a slab that sits wet will not last and will not be the sealer's fault.
On the commercial work, the constraint is traffic loading. Forklifts, delivery vehicles and constant turning are much harder on a surface than a domestic car, and a thin decorative overlay is the wrong product. Those get a hard-wearing plain finish specified for the actual traffic.
Licensed concreting contractor, fully insured.
On site, with the slab tested before anyone quotes a finish.
Foot traffic at 24 hours, vehicles at 72 on most finishes.
Brisbane, Ipswich, Logan, Redlands and both coasts.
How we schedule Beenleigh work
Commercial work is scheduled around trading hours, including weekends and after-hours where a hardstand cannot be closed during the day. We stage in sections so a yard keeps operating.
Residential Beenleigh jobs book like the rest of Logan, usually inside a fortnight. Where the assessment turns up a slab that needs replacing rather than resurfacing, we requote it properly rather than pressing on.
Services in this area
What goes down most often here
Plain concrete
One colour, no cuts, no pattern. The finish that disappears and lets the house do the talking.
See finishExposed aggregate
Washed back to reveal the stone. The South East Queensland driveway default, and the most forgiving surface underfoot.
See finishCovercrete / Covacrete
A trowelled cement overlay stamped or stencilled into pattern. Two to four millimetres over a sound slab.
See finishThe questions we get asked in Beenleigh
You said my slab should be replaced, not resurfaced. Why?
Because an overlay is only as good as what it sits on. Where a slab is too thin, badly cracked or moving, resurfacing buys a year or two and wastes your money. We would rather lose the job than do that.
Can you work on a commercial yard without closing it?
Yes. We stage in sections and can work after hours or on weekends so the yard keeps operating.
Our property is on the flats and gets wet. Does that rule out resurfacing?
Not necessarily, but drainage gets assessed first. A finish over a slab that sits wet will fail, and no sealer fixes standing water.
Do you do concrete removal as well?
Yes — cutting, removal and excavation are all in-house, which matters when the answer is replacement rather than an overlay.
Worth reading first
Others in Logan City
Send a photo of the slab.
We will tell you whether it can be resurfaced, what finish suits it, and what it costs — before anyone turns up with a grinder.